Blueview BV5000 Spezifikationen PDF herunterladen (Seite 13)

Installing the Pan and Tilt Drivers

The SPT junction box contains a USB to RS-485 converter. The converter will

add a COM port to the PC for communicating with the pan and tilt. The drivers for

the converter need to be installed onto the PC. These drivers are located on the

“COMMFRONT USB Serial Adapter” CD included with the mechanical scanning

system.

There are two drivers to install: one is for a “USB Serial Converter” and the

other is for a “USB Serial Port.”

1. Connect the USB port on the control box to an available USB port on the PC.

The “Found New Hardware Wizard” will guide you through the installation process.

2. First, the USB Serial Converter driver will install. When prompted to use

Windows Update to search for the driver select “No, not this time” and click

“Next.”

NOTE: Two separate “Found New Hardware Wizard” windows will pop up. Do not

close the second install wizard while installing the first.

NOTE: For Windows Vista, disconnect your PC from the internet before

installing drivers; otherwise, Windows Vista will search for and install the

drivers automatically from Windows Updates and cause errors. The

instructions below are for Windows XP. Installation for Windows Vista may

vary from the instructions below.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Keine Kommentare

Blueview BV5000 Spezifikationen Seite 13